Kia Sorento: Filler-Neck Assembly Installation

Filler-Neck Assembly Removal

1. Lift the vehicle. 2. Disconnect the fuel filler hose (A). 3. Disconnect the ventilation tube quick-connector ...

Accelerator Pedal Removal

1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...

See also:

A/C Pressure Transducer Description
The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by o ...

Adjustment
1. Operate the horn, and adjust the tone to a suitable level by turning the adjusting screw.    ...

TJ Joint Removal
   • Special grease must be applied to the driveshaft joint. Do not substitute with anoth ...