Kia Sorento: Filler-Neck Assembly Removal
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Filler-Neck Assembly Removal
| 1. |
Lift the vehicle.
|
| 2. |
Disconnect the fuel filler hose (A).
|
| 3. |
Disconnect the ventilation tube quick-connector ( B).
|
| 4. |
Open the fuel filler door and unfasten the filler-neck assembly
mounting screw (A).
|
| 5. |
Remove the rear-LH wheel, tire and the inner wheel house.
|
| 6. |
Remove the filler-neck assembly from the vehicle after removing
the bracket mounting nut (A).
|
Fuel Line Installation
1.
Install in the reverse order of removal.
...
Filler-Neck Assembly Installation
1.
Install in the reverse order of removal.
Filler-neck assembly bracket
installation nut :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ ...
See also:
Steering Column and Shaft Removal
1.
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
2.
Turn the steering wheel so that the fro ...
Quarter Fixed Glass Installation
1.
With a putt knife, scrape the old adhesive smooth to a thickness
of about 2mm (0.08 in.) on the bonding surface around the entire quarter
fixed glass flange.
...
Fuel Pump Motor Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
2.
Disconnect the fuel sender connector (A).
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026