Kia Sorento: Canister Close Valve (CCV)

Canister Close Valve (CCV) is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere when leakage detecting system operates. This valve is normally open when no voltage is applied.

Inspection

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. ...

Specification

Item Specification Coil Resistance (Ω) 19.9 ~ 22.9 [20°C(68°F) ...

See also:

Front Wheel Transfer Assembly Components Location
1. Under cover 2. Transaxle Assembly 3. Transfer assembly 4. Propeller shaft 5. Coupling assembly 1. Under cover 2. Transaxle Assembly 3 ...

TJ Joint Components
[LH] 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Shaft 6. TJ boot band 7. TJ boot 8. Spider assembly 9. Retainer ring 10. ...

Yaw-rate and G Sensor Installation
1. Remove the ignition key from the vehicle. 2. Install inthe reverse order of removal. 3. After installing the ...