Kia Sorento: Specification - Injector - Engine Control System - Engine Control / Fuel System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Specification

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Engine Control / Fuel System / Engine Control System / Injector / Specification

Item
Specification
Coil Resistance (Ω)
1.18 ~ 1.31 [20°C(68°F)]

Injector
The GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fuel swirling as it exits th ...

Signal Waveform
The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side ...

See also:

Windshield Glass Installtion
1. With a knife, scrape the old adhesive smooth to a thickness of about 2mm (0.08 in.) on the bonding surface around the entire windshield opening flange : ...

Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fr ...

Rear Stabilizer Bar Inspection
1. Check the rear stabilizer bar for deformation. 2. Check the rear stabilizer link ball joint for damage. ...

Copyright www.ksmanual.com 2014-2026