Kia Sorento: Specification
HO2S [Bank 1/Sensor 1]
| Item |
Specification |
| Heater Resistance (Ω) |
2.5 ~ 4.0 [20°C(68°F)] |
HO2S [Bank 1/Sensor 2]
| A/F Ratio (λ) |
Output Voltage(V) |
| RICH |
Approx. 0.9 |
| LEAN |
Approx. 0.04 |
| Item |
Specification |
| Heater Resistance (Ω) |
3.3 ~ 4.1Ω[21°C(69.8°F)] |
Heated Oxygen Sensor (HO2S)
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed
both upstream and downstream of the Manifold Catalytic Converter. The sensor
output voltage varies in accordance ...
Circuit Diagram
...
See also:
Output Speed Sensor Removal
1.
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
2.
Disconnect the input & output speed senso ...
Engine Control Module (ECM) Installation
1.
Install in the reverse order of removal.
ECM installation bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m,7.2 ~ 8.7 lb-ft)
ECM ...
Specifications
Memory Power Seat Unit
Item
Specification
Rating voltage
DC 12V
Operation voltage
DC 9V ~ 16V
Operation temperaure
-30°C ...
Copyright © www.ksmanual.com 2014-2024