• |
Install the component with the specified torques.
|
• |
Note that internal damage may occur when the component is dropped.
In this case, use it after inspecting.
|
1. |
Install in the reverse order of removal.
|
Specifications
ON/OFF Solenoid Valve(SS-B)
▷ Control type : Normal low type
Control pressure kpa
(kgf/cm², psi)
490.33 (5.0, 71.12)
Internal resistance(Ω)
...
Roof Antenna Installation
1.
Connect the roof antenna connectors.
2.
Install the rear roof trim.
...
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cov ...