Kia Sorento: Engine Electrical System

Muffler Removal and Installation

1. Remove the front muffler (A) after loosening the mounting nuts. Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft ...

Specification

Ignition System Ignition Coil Item Specification Primary Coil Resistance (Ω) 0.62 ± 10％ [20°C (68°F)] Secondary Coil Re ...

See also:

AC Inverter Switch Removal
   • Pry the trim off using a plastic trim tool and apply protective tape around the rela ...

Block Diagram
...

Battery replacement
The transmitter uses a 3 volt lithium battery which will normally last for several years. When replacement is necessary, use the following procedure. 1. Insert a slim tool into the slot and gently ...