Kia Sorento: Engine Room Under Cover Removal and Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Engine Mechanical System / Engine And Transmission Assembly / Engine Room Under Cover Removal and Installation

1.

Unfasten the fasteners and bolts and then remove the engine room under cover (A).

Tightening torque:

7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft)

2.

Remove the engine room side cover(A).

Tightening torque:

7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft)

[RH]

[LH]

3.	Install in the reverse order of removal.

Engine Room Under Cover Components

1. Under Cover 2. Side Cover (RH) 3. Side Cover (LH) ...

Engine Mounting Components

1. Transaxle mounting bracket 2. Roll rod bracket 3. Engine mounting bracket 4. Engine mounting support bracket ...

See also:

Circuit Diagram
...

Audio system
✽ NOTICE If you install an after market HID head lamp, your vehicleâ€™s audio and electronic device may malfunction. Antenna Your vehicle uses a roof antenna to receive AM or/and FM broad ...

Component Location
[Engine Room] 1. Receiver-drier 2. Condenser 3. Ambient temperature Sensor 4. Compressor 5. Discharge Hose 6. Suction & Liquid Tube Assembly 7. Servic ...

Categories

Copyright © www.ksmanual.com 2014-2026