Kia Sorento: Lift And Support Points
|
When heavy rear components such as suspension, fuel tank, spare tire, tailgate
and trunk lid are to be removed, place additional weight in the luggage
area before hoisting. When substantial weight is removed from the rear of
the vehicle, the center of gravity may change and can cause the vehicle
to tip forward on the hoist. |
| • |
Since each tire/wheel
assembly weights approximately 14kg (30lbs), placing the front wheels
in the luggage area can assist with the weight distribution. |
| • |
Use the same support
points to support the vehicle on safety stands. |
|
| 1. |
Place the lift blocks under the
support points as shown in the illustration. |
| 2. |
Raise the hoist a few inches
(centimeters) and rock the vehicle to be sure it is firmly supported. |
| 3. |
Raise the hoist to full height
to inspect the lift points for secure support.
|
1. Fan caution
2. Radiator cap caution
3. Battery caution
Battery Caution Label Description
Warning / Caution Label (Cont'd)
A.
Keep lighted cigarett ...
If the vehicle needs to be towed, call a professional towing service. Never tow
vehicle with just a rope or chain. It is very dangerous.[Front]
[Rear]
Emergency Towing
There are three popul ...
See also:
Tail Gate Replacement
Tailgate Trim Replacement
1.
Using a screwdriver or remover, remove the upper trim (B).
2.
After loosening the mounting screws, then remove ...
Components
1. Piston ring
2. Snap ring
3. Piston
4. Connecting rod
5. Connecting rod upper bearing
6. Piston pin
7. Connecting rod lower bearing
8. Connecting rod bearing cap ...
Engine Mounting Removal and Installation
Roll road Bracket
1.
Remove the roll road bracket(A).
Tightening torque
Bolt (B) :
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ...
Warning And Caution Labels
Towing