1. |
Install the rear ultra sensor after connecting the connector.
|
2. |
Install the rear bumper cover.
|
3. |
Connect the negative (-) battery terminal.
|
Oil hydraulic Motor(Actuator) Installation
1.
Before installation, wipe the surface with a clean cloth.
2.
Check the O-rings (A) of the new hydraulic motor (actuators).
...
Installation
1.
Install the multifunction switch.
2.
Install the clock spring and steering wheel.
3.
Install the steering co ...
Alternator Disassembly
1.
Remove the alternator cover (A) using a screw driver after loosening
the nuts (B).
2.
Remove the slip ring guide (A) and then lo ...