Kia Sorento: Installation

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body Electrical System / Ignition Switch Assembly / Installation

1.	Install the key lock cylinder.

2.	Install the illumination bulb, lens and cover.

3.	Install the key warning and immobilizer connector.

4.	Install the ignition switch.

5.	Install the steering column shrouds and crash pad lower panel.

Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds. (Refer to Steering System - &quo ...

Rear Parking Assist System

...

See also:

Schematic Diagram
...

Front Wheel Transfer Assembly Removal
It is not recommended to overhaul the transfer assembly because a special three-dimensional measuring instrument is requ ...

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Veh ...

Categories

Copyright © www.ksmanual.com 2014-2025