Kia Sorento: Start/Stop Button Removal
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Button Engine Start System / Start/Stop Button Removal
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the crash pad lower panel (A).
(Refer to Body - "Crash pad")
|
| 3. |
Remove the start/stop button cover (A) after loosening the mounting
screw.
|
| 4. |
Disconnect the connector (A).
|
| 5. |
Remove the start/stop button (A) after loosening the mounting
screws.
|
Start/Stop Button Installation
1.
Install the start/stop button.
2.
Install the start/stop button cover.
3.
Install the crash pad lower panel. ...
See also:
Engine Control Module (ECM) Adjustment
•
After replacing the ECM of the vehicle with the immobilizer, the
following procedure must be performed.
1)
[If installing a used ECM]
...
Engine Mounting Components
1. Transaxle mounting bracket
2. Roll rod bracket
3. Engine mounting bracket
4. Engine mounting support bracket
...
Shift Lever Components
1. Shift lever mounting bolt
2. Shift lever assembly
3. Shift cable assembly
4. Shift lever knob & boots assembly
5. Manual control lever
6. Retainer
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026