Kia Sorento: Auto Light Sensor Installation

Auto Light Sensor Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the photo & auto light sensor (A) from crash pad upper side by using screw ( ...

Head lamp leveling Device

...

See also:

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve ...

Rear Upper Arm Inspection
1. Check the bushing for wear and deterioration. 2. Check the rear upper arm or damage and deformation. 3. ...

Emergency starting
Connect cables in numerical order and disconnect in reverse order. Jump starting Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicle ...