Kia Sorento: Rear combination lamp Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Lighting System / Rear combination lamp Installation

1.	Install the tailgate combination lamp assembly after replacing the bulb.

2.	Install the lamp cover to the tailgate after connecting the lamp connector.

3.	Install the rear combination lamp assembly after replacing the bulbs and connecting the lamp connector.

Rear combination lamp Removal

1. Disconnect the negative (-) battery terminal. [Outside] 2. Loose the screws (2EA) holding the rear combination lamp then disconn ...

Troubleshooting

Symptom Possible cause Remedy One lamp does not light (all exterior) Bulb burned out Replace bulb Socket, wiring or ground faulty ...

See also:

General Inspection
After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symp ...

Climate Control Air Filter Description
The climate control air filter is located in the blower unit. It eliminates foreign materials and odor. The particle filter performs a role as an odor filter as well as a conventional dust fi ...

Windshield Wiper-Washer Switch Installation
1. Install the windshield wiper switch. 2. Connect the wiper switch connector. 3. Install the steering column u ...

Categories

Copyright © www.ksmanual.com 2014-2026