Kia Sorento: Hands Free Switch Installation - Hands Free System - Body Electrical System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Hands Free Switch Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Hands Free System / Hands Free Switch Installation

1.
Install the handsfree remote switch to the steering wheel front cover.
2.
Install the steering wheel front cover.
3.
Reconnect the handsfree remote control switch connector and airbag connectors.
  
Make sure that the switch connector is plugged in properly.
4.
Install the driver airbag module.
Hands Free Switch Removal
1. Remove the driver airbag module. (Refer to Restraint - "Airbag module") 2. Remove the steering wheel front cover (A) after ...

Hands Free Mic Inspection
1. Disconnect the negative(-) battery terminal. 2. Remove the hands free mic (A) after disengaging the hook from roof top. ...

See also:

Steering Gear box Removal
1. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Emergency Fastening Device (EFD) Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the negative (-) cable from battery and wait for at least thirty seconds. ...

Oil hydraulic Motor(Actuator) Installation
1. Before installation, wipe the surface with a clean cloth. 2. Check the O-rings (A) of the new hydraulic motor (actuators). ...

Copyright www.ksmanual.com 2014-2026