Kia Sorento: Hands Free Switch Inspection - Hands Free System - Body Electrical System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Hands Free Switch Inspection

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Hands Free System / Hands Free Switch Inspection

1.
Check the handsfree remote control switch for resistance between No.2 and No.5 terminals in each switch position.

[Call + Hang Up]
Switch
Connector terminal
Resistance
(±5%)
Output voltage
(±0.16V)
Call
2 - 5 (Right)
30.2 kΩ ±5%
2.96V
Hang up
2 - 5 (Right)
8.2 kΩ ±5%
2.64V

Hands Free Switch Component Location
...

Hands Free Switch Removal
1. Remove the driver airbag module. (Refer to Restraint - "Airbag module") 2. Remove the steering wheel front cover (A) after ...

See also:

Ignition Coil Specification
Item Specification Primary Coil Resistance (Ω) 0.62 ± 10% [20°C (68°F)] Secondary Coil Resistance (kΩ) 7.0 ± 15% [20 ...

Battery Components
1. Battery insulation pad 2. Battery 3. Battery tray 4. Battery mounting bracket ...

Using the USB device
To use an external USB device, make sure the device is not connected when starting up the vehicle. Connect the device after starting up. If you start the engine when the USB device is connected ...

Copyright www.ksmanual.com 2014-2026