Kia Sorento: Power Tailgate Latch Installation - Power Tailgate Module - Body Electrical System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Power Tailgate Latch Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Power Tailgate Module / Power Tailgate Latch Installation

1.
Install the power tailgate latch & PCU assembly.
2.
Install the tailgate trim.
3.
Connect the negative (-) battery terminal.
Power Tailgate Latch Removal
1. Disconnect the negative (-) battery terminal. 2. After loosening the mounting screws, then remove the tailgate trim (A). (Refer ...

Power Tailgate Latch Inspection
Power Tailgate Inspection With GDS 1. Check the power Tailgate module input/output value by using the GDS. If the operation of power Tailgate module is abnormal, replac ...

See also:

Coolant Refilling And Bleeding
   Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure ...

Rear Driveshaft Inspection
1. Check the driveshaft boots for damage and deterioration. 2. Check the ball joint for wear and damage. 3. Che ...

Changing a tire with TPMS
If you have a flat tire, the Low Tire Pressure telltale will come on. Have the flat tire repaired by an authorized Kia dealer as soon as possible or replace the flat tire with the spare tire. CAUTI ...

Copyright www.ksmanual.com 2014-2026