Kia Sorento: Power Tailgate Unit Installation - Power Tailgate Module - Body Electrical System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Power Tailgate Unit Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Power Tailgate Module / Power Tailgate Unit Installation

1.
Install the power tailgate unit.
2.
Install the rear left luggage side trim.
3.
Connect the negative (-) battery terminal.
Power Tailgate Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the rear left luggage side trim. (Refer to Body - "Interior Trim") ...

Power Tailgate Latch Removal
1. Disconnect the negative (-) battery terminal. 2. After loosening the mounting screws, then remove the tailgate trim (A). (Refer ...

See also:

Description
Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehic ...

Fluid Replacement
   The ATF of the 6 speed automatic transaxle does not need to be replaced.If the vehicle is used in severe conditions or b ...

Battery Vehicle parasitic current inspection
1. Turn the all electric devices OFF, and then turn the ignition switch OFF. 2. Close all doors except the engine hood, and then lock all d ...

Copyright www.ksmanual.com 2014-2026