Kia Sorento: Rear Glass Defogger Switch Inspection
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Rear Glass Defogger / Rear Glass Defogger Switch Inspection
| 1. |
It will be able to diagnose defects of rear glass defogger with
GDS quickly. GDS can operates actuator forcefully, input/output value
monitoring and self diagnosis.
|
| 2. |
Select "Current data", if you will check current data of rear
glass defogger system. It provides input/output status of rear glass
defogger.
|
| 3. |
If you will check the rear glass defogger operation forcefully,
select "Actuation test".
|
| 4. |
To check the DTC of the rear glass defogger, select "Diagnostic
trouble codes"
|
Rear Glass Defogger Switch Installation
1.
Install the heater control unit.
2.
Install the center fascia panel.
...
See also:
Rearview camera (If equipped)
The rearview camera will activate with the ignition switch ON and the shift lever
in the R (Reverse) position.
This system is a supplemental system that shows behind the vehicle through the
rearv ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the crankshaft position sensor connector (A).
...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification:
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026