Kia Sorento: ICM (Integrated Circuit Module) Relay Box Component

Relay Box (Passenger Compartment) Installation

1. Install IPM(Intelligent intergrated Platform Module). 2. Connect the IPM connector. 3. Install the crash pad ...

ICM Relay Box Description

The ICM relay is united with rear wiper relay, rear blower relay, rear seat warmer relay (LH/RH), two turn unlock relay and tailgate latch relay which installed inside the lower crash pad. ...

See also:

Rear Coil Spring Removal
1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Pressure Sensor Removal
1. Remove the coupling assembly. (Refer to Coupling Assembly - "Direct Electro Hydraulic Actuator Coupling") 2. Remove th ...

Crankshaft Damper Pulley Removal and Installation
1. Remove the drive belt. (Refer to Timing System - "Drive Belt") 2. Remove the passenger engine room side cover. (Ref ...