Kia Sorento: Relay Box (Passenger Compartment) Installation - Fuses And Relays - Body Electrical System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Relay Box (Passenger Compartment) Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Fuses And Relays / Relay Box (Passenger Compartment) Installation

1.
Install IPM(Intelligent intergrated Platform Module).
2.
Connect the IPM connector.
3.
Install the crash pad lower panel.
Relay Box (Passenger Compartment) Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel (A). (Refer to Body - "Crash pad") ...

ICM (Integrated Circuit Module) Relay Box Component
...

See also:

A/C Pressure Transducer Inspection
1. Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”. 2. Inspect the volt ...

Active ECO operation
Active ECO helps improve fuel efficiency by controlling certain engine and transaxle system operating parameters. Fuel efficiency depends on the driver's driving habit and road condition. ...

Transaxle Control Module (TCM) Installation
   When replacing the TCM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the ...

Copyright www.ksmanual.com 2014-2026