Kia Sorento: Air Ventilation Seat Removal
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Removal
| 1. |
Remove the seat back cover (A).
(Refer to Body - "Front seat")
|
| 2. |
Remove the blower fan (A) after removing the screws from the seat
back.
|
| 3. |
Remove the air duct (A) after disengaging the hook.
|
| 4. |
Remove the seat cushion (A).
(Refer to Body - "Front seat")
|
| 5. |
Remove the blower fan (A) after removing the screws and disengaging
hook.
|
| 6. |
Disconnect the connecter and remove the blower (A).
|
Air Ventilation Seat Description
Air ventilation seat
It blows the indoor air through the blower fan installed at the seat cushion
and back lower part, and supplies the air into the seat cushion and the seat
back through ...
Air Ventilation Seat Installation
1.
Install the blower fan.
2.
Install the seat back and cushion.
...
See also:
Description
Back view camera will activate when the backup light is ON with the ignition
switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the vehic ...
System Overview
RPAS (Rear Parking Assist System) is an electronic driving aid that warns
the driver to be cautious while parking or in low speed environments. The sensor
uses ultrasonic waves to detect obje ...
Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
Control Pressure kpa
(kgf/cm², psi)
0 ~ 539.37 (0 ~ 5.5, 0 ~ 78.23)
Current value(mA)
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026