Kia Sorento: Air Ventilation Seat Description

Air ventilation seat

It blows the indoor air through the blower fan installed at the seat cushion and back lower part, and supplies the air into the seat cushion and the seat back through the duct.

It sends a indoor air to the seat surface through the air ventilation layer between upper and lower layer.

Seat Back Layers

Seat Cushion Layers

Fan

Seat Heater Inspection

Front seat 1. Operate the seat warmer after connecting the connector, and then check the thermostat by measuring the temperature of seat surface. ...

Air Ventilation Seat Removal

1. Remove the seat back cover (A). (Refer to Body - "Front seat") 2. Remove the blower fan (A) after removing the scr ...

See also:

Component Location
1. Cluster assembly 2. Seat belt switch 3. Vehicle speed sensor 4. Engine coolant temperature sender 5. Oil pressure switch 6. Brake fluid level warning switch 7. Parking ...

Master Cylinder Installation
1. Installation is the reverse of removal. 2. After installation, bleed the brake system. (Refer to Brake system - "Brake system B ...

Audio Remote Control Removal
1. Remove the driver airbag module. (Refer to Restraint - "Airbag module") 2. Remove the steering wheel front cover (A) after ...