1. |
Install the IMS module after reconnecting the connector.
|
2. |
Install the driver seat.
|
ATF Warmer Description
The ATF warmer is mounted on the valve body cover to reduce oil viscosity
friction by increasing oil temperature under cold condition, which in turn improves
fuel efficiency. It is serial mou ...
Seat Heater Switch Inspection
Front Seat Heater Switch
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center fascia panel (A).
(Refer to Body - &q ...
Front Impact Sensor (FIS) Removal
•
Removal of the airbag must be performed according to the
precautions/ procedures des ...