Kia Sorento: AVN Head Unit Components

| AVN (A/V & Navigation) Head Unit Connector |

| No. |
Connector A |
Connector B |
Connector C |
| 1 |
- |
MM CAN High |
- |
| 2 |
Parking V VIDEO |
Ground (Non TMU) / - (TMU) |
- |
| 3 |
Parking V GND |
Parking (MT) |
- |
| 4 |
Rear camera shield ground |
Steering wheel remocon |
- |
| 5 |
SPDIF ground |
- |
- |
| 6 |
SPDIF (+) |
- |
- |
| 7 |
ALT L |
- |
- |
| 8 |
Illumination (+) |
AUX right input |
- |
| 9 |
R position |
AUX ground |
- |
| 10 |
- |
MIC (+) |
Fuel indicator |
| 11 |
Rear camera power |
ACC (+) |
Door open |
| 12 |
Navigation voice (-) |
Battery (+) |
- |
| 13 |
Navigation voice (+) |
MM CAN Low |
- |
| 14 |
- |
Auto light |
- |
| 15 |
SPDIF (-) |
P position (AT) |
- |
| 16 |
Door key unlock |
Vehicle speed |
- |
| 17 |
Illumination (-) |
Key ground |
- |
| 18 |
Antenna remocon power |
- |
- |
| 19 |
|
- |
- |
| 20 |
AUX detect |
- |
|
| 21 |
AUX left input |
- |
|
| 22 |
MIC (-) |
- |
|
| 23 |
Power ground |
Ground |
|
| 24 |
Power ground |
- |

Description
AVN Head Unit RemovalBattery Sensor Installation
1.
Install in the reverse order of removal.
Battery sensor cable installation
bolt:
10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~ 10.1 lb ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the manifold absolute pressure sensor connecto ...
Oil Cooler Removal
1.
Loosen the drain plug, and drain the coolant. Remove the radiator cap
to help drain the coolant faster.
2.
Disconnect the oil cooler coo ...