Kia Sorento: Seat & Power Seat

Rear Bumper Replacement

   • Pry the trim off using a plastic trim tool and apply protective tape around the rela ...

Front Seat Replaccement

Seat Assembly Replacement 1. Remove the seat assembly mounting cover. 2. After loosening the seat assembly mounting bolts, remove the seat ...

See also:

Auto Defogging Sensor Description
The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module rece ...

Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Steering Column and Shaft Disassembly
Universal joint assembly 1. Loosen the bolt (A) and then disconnect the universal joint assembly from the steering column assembly. Tightenin ...