Kia Sorento: Quarter Fixed Glass Removal
| •
|
Put on gloves to protect your hands.
|
| •
|
Take care not to body surface and other parts.
|
|
|
1. |
Remove the following parts.
| A. |
Second row seat assembly
|
| B. |
Third row seat assembly
|
|
|
2. |
Loosen the quarter fixed glass (A) mounting nut.
Tightening torque :
5.9 ~6.4N.m (0.6~0.65Kgf.m, 4.3~4.7lb-ft)
|
|
|
3. |
Cut out the sealant using the sealant cutting tool (09861-31100).
|
• |
Do not scrape down to the painted surface of the
body; damaged paint will interfere with proper bonding.
|
|
• |
Remove the rubber dam and fastereners from the
body.
|
|
• |
Mask off surrounding surfaces before painting.
|
|
|
|
4. |
Remove the quarter fixed glass.
|
1.
With a knife, scrape the old adhesive smooth to a thickness of
about 2mm (0.08 in.) on the bonding surface around the entire windshield
opening flange :
...
1.
With a putt knife, scrape the old adhesive smooth to a thickness
of about 2mm (0.08 in.) on the bonding surface around the entire quarter
fixed glass flange.
...
See also:
Knock Sensor (KS)
Knocking is a phenomenon characterized by undesirable vibration and noise
and can cause engine damage. Knock Sensor (KS) is installed on the cylinder
block and senses engine knocking.
Whe ...
Cylinder Head Installation
•
Thoroughly clean all parts to be assembled.
•
...
Owner maintenance
The following lists are vehicle checks and inspections that should be performed
by the owner or an authorized Kia dealer at the frequencies indicated to help ensure
safe, dependable operation of you ...
Windshield Glass Installtion
Quarter Fixed Glass Installation