1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the steering column upper and lower shrouds (A) after loosening
3 screws.
|
3. |
Remove the wiper switch (A) with pushing the lock pin (C) after
disconnecting the connector (B).
|
Mode Control Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the driver's side crash
pad side cover.
...
Tire sidewall labeling
This information identifies and describes the fundamental characteristics of
the tire and also provides the tire identification number (TIN) for safety standard
certification. The TIN can be used ...
Crankshaft Disassembly
•
Use fender covers to avoid damaging painted surfaces.
•
...