Kia Sorento: Water Temperature Control Assembly Components

Reservoir Tank Removal and Installation

1. Remove the over flow hose(A). 2. Remove the reservoir tank(B) after loosening the bolts. Tightening torque: ...

Water Temperature Control Assembly Removal

1. Disconnect the battery negative terminal. 2. Loosen the drain plug and drain the engine coolant. 3. Remove ...

See also:

Installation
1. Install in the reverse order of removal. Accelerator pedal module installation nut: 16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18 ...

Rear Seat Replacement
Rear Seat Assembly Replacement [Second row seat assembly] 1. Push the second row seat assembly [RH] (A) towards the front of the vehicle as far as possibl ...

Start/Stop Button Component
...