1. |
Loosen the drain plug, and then drain the engine coolant.
Remove the radiator cap to help drain the coolant faster.
|
2. |
Remove the drive belt after turning the drive belt tensioner counterclockwise.
(Refer to Timing System - "Drive Belt")
|
3. |
Remove the water pump pulley (A).
|
4. |
Remove the water pump sub assembly (A) with the gasket.
|
5. |
Remove the exhaust manifold heat protector.
(Refer to Intake And Exhaust System - "Exhaust Manifold")
|
6. |
Remove the water pump housing (B) with the gasket and the water inlet
pipe (A).
|
7. |
Install in the reverse order of removal with a new water pump gasket.
|
8. |
Fill the engine coolant.
|
9. |
Start the engine and check for leaks.
|
10. |
Recheck the coolant level.
|
1. TCM connector and terminal function
...
Front Disc Brake Removal
1.
Remove the front wheel & tire.
Tightening torque:
88.3 ~107.9 N.m (9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft)
...
Adjustment
Description
The friction material inside the coupling will degrade over time. Therefore,
corresponding compensation values must be referenced and entered after replacing
the cont ...