1. |
Check each part for cracks, damage or wear, and replace the coolant
pump assembly if necessary.
|
2. |
Check the bearing for damage, abnormal noise and sluggish rotation,
and replace the coolant pump assembly if necessary.
|
3. |
Check for coolant leakage. If coolant leaks from hole, the seal is defective.
Replace the coolant pump assembly.
|
In-car Sensor Inspection
1.
Turn the ignition switch ON.
2.
Blow air with changing temperature into the in-car sensor air
inlet. Measure the sensor resistance betwe ...
Instrument Cluster Components
Connector Pin Information
Pin No.
Description
Pin No.
Description
1
Airbag supply
21
Battery
2
P (AT)
...
Power Window Motor Inspection
Front Power Window Motor
1.
Remove (-) negative battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front door&q ...