1. |
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
2. |
Remove the battery and the battery tray.
(Refer to Engine Electrical System - "Battery")
|
3. |
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
|
4. |
Drain the coolant.
(Refer to Engine Mechanical System - "Coolant")
|
5. |
Remove the drain plug (A) and reinstall the drain plug after draining
ATF totally.
|
6. |
Remove the wiring bracket installation bolt (A).
|
7. |
Remove the ATF Injection hole(eyebolt) (A).
|
8. |
Disconnect the coolant hose (B) after removing the coolant hose
clamp (A).
|
9. |
Disconnect the hose (B) after removing the automatic transaxle
fluid cooler hose clamp (A).
|
10. |
Remove the valve body cover (A).
|
11. |
Remove the bolts (C) after disconnecting the solenoid valve connector
(B) and the oil temperature sensor connector (A).
|
12. |
Remove the valve body assembly (A).
|
Condenser Inspection
1.
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent, gently
bend them using a screwdrive ...
Specifications
Items
Specification
Hood
Type
Rear hinged, gas lifter type
Front Door
Construction
Front hinged, full door construction
...
Erasing programmed HomeLink buttons
To erase the three programmed buttons (individual buttons cannot be erased):
Press and hold the left and center buttons simultaneously, until the indicator
light begins to flash (approximately 20 ...