Severe driving conditions
* Transfer oil should be replaced if the transfer assembly is
fall into the water.
|
1. |
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
|
2. |
Drain the transfer oil after loosening the drain plug (A).
|
3. |
Install the drain plug with new gasket.
|
4. |
Remove the oil filler plug (A).
[Gasoline 2.4]
[Gasoline 3.3]
|
5. |
Add new oil through the filler plug hole.
|
6. |
Install the oil filler plug with new gasket.
|
7. |
Install the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
|
Transaxle Oil Temperature Sensor Inspection
1.
Turn ignition switch OFF.
2.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
...
Battery saver function
The purpose of this feature is to prevent the battery from being discharged
if the lights are left in the ON position. The system automatically shuts off
the parking lights 30 seconds after the ...
Side Impact Sensor (SIS) Installation
Front Side Impact Sensor
•
Do not turn the ignition switch ON and do not connect ...