Kia Sorento: TPMS Receiver Operation
1. |
General Function
A. |
Auto learn takes place only once per Ignition cycle.
|
B. |
On successful completion.
|
C. |
Until Auto-learn completes, previously learned sensors
(together with their respective locations) are monitored for
under inflation / leak warnings.
|
D. |
Spare tire inflation / DTC state is not displayed.
|
|
2. |
General Conditions to Learn New Sensors:
A. |
Auto learning only functions when speed is more than 25
kph (approx. 15 mph).
|
B. |
Receiver must determine that it is confident that sensor
is not temporary:
|
2) |
Uses confidence reduction of previously learned
sensors.
|
|
C. |
Typical time at driving over 25 kph to learn a new sensor
is up to 10 minutes.
|
|
3. |
General Conditions to Un-Learn a sensor that is removed:
A. |
It takes less than 10 minutes at 20~30kph.
|
B. |
Confidence reduction is dependant on vehicle speed and
the number of sensors known to the receiver.
|
|
1.
Mode
(1)
Virgin State
A.
The receiver as a sole part is shipped in this
state. ...
When the receiver first arrives for replacement:
1)
It will be in Virgin State.
...
See also:
Evaporator Temperature Sensor Description
The evaporator temperature sensor will detect the evaporator core temperature
and interrupt compressor relay power in order to prevent evaporator from freezing
by excessive cooling
...
Schematic Diagram
Canister
Canister is filled with charcoal and absorbs evaporated vapor in fuel
tank. The gathered fuel vapor in canister is drawn into the intake manifold
by the ECM/PCM when appropri ...
Catalytic Converter Removal
1.
Remove the exhaust manifold.
(Refer to Engine Mechanical System - "Exhaust Manifold")
...