Kia Sorento: TPMS Receiver Description

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Suspension System / Tire Pressure Monitoring System / TPMS Receiver Description

1.

Mode

(1)

Virgin State

A.	The receiver as a sole part is shipped in this state. Replacement parts should therefore arrive in this state.

B.	In this state, there is no Auto-Location, no sensor wake-up, no sensor monitoring and no DTC monitoring.

C.	The state indicates that platform specific parameters must be written to the receiver and that sensors are un-learned.

(2)

Normal State

A.	In order for tire inflation state and DTC monitoring to occur, the receiver must be in this state.

B.	In this state, automatic sensor learning is enabled.

2.

Overview

A.	Auto-Learns new sensors.

B.	Receives RF data from sensor.

C.	Uses sensor data to decide whether to turn on TREAD Lamp.

D.	Uses sensor information, distance traveled, background noise levels, Auto-learn status, short circuit output status, vehicle battery level, internal receiver states to determine if there is a system or a vehicle fault.

TPMS Sensor Installation

Sensor Fit • Handle the sensor with care. • ...

TPMS Receiver Operation

1. General Function A. Auto learn takes place only once per Ignition cycle. B. On successful compl ...

See also:

Power Door Mirror Switch Circuit Diagram
...

Filler-Neck Assembly Removal
1. Lift the vehicle. 2. Disconnect the fuel filler hose (A). 3. Disconnect the ventilation tube quick-connector ...

Cruise Control
The cruise control system is engaged by the cruise "ON/OFF" main switch located on right of steering wheel column. The system has the capability to cruise, coast, accelerate and res ...

Categories

Copyright © www.ksmanual.com 2014-2024