1. |
Immerse the thermostat in water and gradually heat the water.
|
2. |
Check the valve opening temperature.
If the valve opening temperature is not as specified, replace the thermostat.
|
3. |
Check the valve lift.
If the valve lift is not as specified, replace the thermostat.
|
Installation
1.
Install in the reverse order of removal.
Accelerator pedal module installation
nut:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18 ...
3. TCM Terminal input/ output signal
Connector [A]
Pin No.
Signal
Condition
Type
Level
29
Sports mode up switch
Up ON
Input
0V/Battery voltage level
...
Circuit Diagram
...