1. |
Loosen the bolt (A) and then disconnect the universal joint assembly
from the steering column assembly.
|
2. |
Reassembly is the reverse of the disassembly.
|
1. |
Make a groove on the head of special bolts (A) by a punch.
|
2. |
Loosen the special bolt using a screw driver and then remove the
key lock assembly from the steering column assembly.
|
3. |
Reassembly is the reverse of the disassembly.
|
Direct Electro Hydraulic Actuator Coupling Inspection
All units are filled up with coupling fluid (ultra-low viscosity
ATF) prior to shipping. Inspection, fill-up, and replac ...
TPMS Receiver Operation
1.
General Function
A.
Auto learn takes place only once per Ignition cycle.
B.
On successful compl ...
Tires/Wheels
•
Using tires and wheel other than the recommended sizes
could cause unusual handling ...