Kia Sorento: Starter Removal
| 1. |
Disconnect the battery negative terminal.
|
| 2. |
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
| 3. |
Remove the ETC module.
(Refer to Fuel System - "ETC")
|
| 4. |
Remove the intake manifold stay (A).
|
| 5. |
Disconnect the starter cable (A) from the B terminal on the solenoid,
then disconnect the connector (B) from the S terminal.
|
| 6. |
Remove the 2 bolts (C) holding the starter, then remove the starter.
|
| 7. |
Remove the 2 bolts holding the starter, then remove the starter
(A).
|
Starter Installation
1.
Install in the reverse order of removal.
Starter installation bolt:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
...
See also:
Installation
1.
Install the mirror making sure the mounting bracket not to be
damaged.
2.
Install the mirror wiring cover after reconnecting the connect ...
Windshield Glass Removal
•
Put on gloves to protect your hands.
•
...
Cargo Lamp Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cargo lamp lens (A) with a flat-tip screwdriver.
3.
...
Copyright © www.ksmanual.com 2014-2024