Kia Sorento: Starter Installation - Starting System - Engine Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Starter Installation

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Electrical System / Starting System / Starter Installation

1.
Install in the reverse order of removal.

Starter installation bolt:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)

Starter Removal
1. Disconnect the battery negative terminal. 2. Remove the air duct and air cleaner assembly. (Refer to Engine Mechanical System - &quo ...

Starter Disassembly
1. Disconnect the M-terminal (A) on the magnet switch assembly (B). 2. After loosening the screws (A), detach the magnet switch assembly ...

See also:

Trouble Symptom Charts
Trouble Symptom 1 Trouble Symptom 2 Trouble symptom Probable cause Remedy The set vehicle speed varies greatly upward or downward "Surgin ...

Specification
Item Specification Coil resistance (Ω) 30.0 ~ 35.0 [20°C(68°F)] ...

Adjustment
Transaxle Control Module(TCM) Learning When shift shock is occurred or parts related with the transaxle are replaced, TCM learning should be performed. In the following case, TCM learni ...

Copyright © www.ksmanual.com 2014-2024