1. |
Disconnect the M-terminal (A) on the magnet switch assembly (B).
|
2. |
After loosening the screws (A), detach the magnet switch assembly
(B).
|
3. |
Loosen the through bolts (A).
|
4. |
Remove the brush holder assembly (A), yoke (B) and armature (C).
|
5. |
Remove the lever plate (B) and lever packing (A).
|
6. |
Remove the packing (A) and shield (B).
|
7. |
Disconnect the planet gear (A).
|
8. |
Disconnect the planet shaft assembly (or reducer assembly) (A)
and lever (B).
|
9. |
Press the stopper (A) using a socket (B).
|
10. |
After removing the stop ring (A) using stop ring pliers (B).
|
11. |
Disconnect the stopper (A), overrunning clutch (B), internal gear
(C), planet shaft (D) and/or gasket sheet (E).
|
12. |
Reassembly is the reverse of disassembly.
|
Circuit Diagram
Connector Pin Information
No.
Wire harness connector
Panorama motor
Blind motor
1
Ground 1 ...
Front Wiper Motor Component Location
1. Cap
2. Nut
3. Wiper arm & blade
4. Retainer
5. Cowl top cover
6. Bolt
7. Wiper motor & linkage assembly
8. Wiper motor connector
...
Tire and wheels
Tire care
For proper maintenance, safety, and maximum fuel economy, you must always maintain
recommended tire inflation pressures and stay within the load limits and weight
distribution recommended ...