1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
3. |
Install the SRSCM with the SRSCM mounting bolts.
|
4. |
Connect the SRSCM harness connector.
|
5. |
Install the rear air vent duct and floor console.
(Refer to Body - "Floor console")
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the SRSCM, confirm proper system operation:
|
Description
An inverter is a device that transforms the DC voltage from the battery
into an AC voltage (115 V). The inverter can power various electrical devices
that consume 150 W or less, including mob ...
Head Lamps Inspection
1.
Check-points upon head lamp failure (HID)
(1)
Check the battery voltage. (Low beam will be on when the
battery voltage above 9V.) ...
Description
EPS (Electric power steering, Column assist type) system uses an electric
motor to assist the steering force and it is an engine operation independent
steering system.
EPS control module ...