Kia Sorento: SRS Control Module (SRSCM) Components

SRS Control Module (SRSCM) Description

The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that does not. The ...

SRS Control Module (SRSCM) Removal

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

See also:

Seat belt restraint system
WARNING For maximum restraint system protection, the seat belts must always be used whenever the vehicle is moving. Seat belts are most effective when seatbacks are in the upright position. ...

Accelerator Position Sensor (APS)
Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine ...

On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.    ...