Kia Sorento: Specifications - Body (Interior and Exterior) - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Specifications

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body (Interior and Exterior) / Specifications

Items
Specification
Hood
Type
Rear hinged, gas lifter type
Front Door
Construction
Front hinged, full door construction
Regulator system
Wire-drum type
Locking system
Pin-fork system
Rear Door
Construction
Front hinged, full door construction
Regulator system
Wire-drum type
Locking system
Pin-fork system
Tail Gate
Type
Front hinged, gas lifter type
Seat Belts
Front
3 point type with Emergency Locking Retractor (E.L.R)
Rear
3 point type with Emergency Locking Retractor (E.L.R)
2 point type

Body (Interior and Exterior)
...

Tightening Torque
Items N.m Kgf.m lb-ft Front and rear doors Door hinge to body 33.3~41.2 3.4~4.2 24.6~30.4 Door hinge to door 21 ...

See also:

Rear Driveshaft Removal and Installation
1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ...

Good driving practices
Never move the gear shift lever from P (Park) to any other position with the accelerator pedal depressed. Never move the gear shift lever into P (Park) when the vehicle is in motion. Be sure ...

Copyright www.ksmanual.com 2014-2026