Kia Sorento: Specifications
| Items |
Specifications |
| Rated voltage |
DC 12V |
| Operating temperature range |
-22 ~ +176°F (-30°C ~ +80°C) |
| Rated load |
Dimmer & passing switch |
High : 1.0A (Relay load) Low : 1.0A (Relay load) Passing : 1.0A (Relay load) |
| Lighting switch |
Lighting : 1.0A (Relay load) |
| Turn signal switch |
6.6 ± 0.5A (Lamp load) |
| Wiper & mist switch |
Low, High : 4.0A (Motor load) Intermittent : 0.22 ± 0.05A (Relay load) Lock : Max. 28A (Motor load) Mist : 4.0A (Motor load) Washer : 4.0A (Motor load) |
| Front fog lamp switch |
1.0A (Relay load) |
| Rear wiper & washer |
Wiper : 0.2A (Relay load) Washer : 4.0A (Motor load) |
Component
...
See also:
Water Temperature Control Assembly Components
1. O-ring
2. Water temperature control assembly
3. Water inlet fitting
4. Engine coolant temperature sensor
5. Thermostat
6. Thermostat gasket
7. Oil cooler coolant ho ...
In-car Sensor (DATC only) Description
An in-car air temperature sensor is located in the crash pad lower panel.
The sensor contains a thermistor which measures the temperature of the
inside. The signal decided by the resistance ...
Using the USB device
To use an external USB device, make sure the device is not connected when
starting up the vehicle. Connect the device after starting up.
If you start the engine when the USB device is connected ...
Copyright © www.ksmanual.com 2014-2024