Kia Sorento: Specification
| Accelerator Position |
Output Voltage (V) |
|
| APS1 |
APS2 |
|
| C.T |
0.7 ~ 0.8 |
0.275 ~ 0.475 |
| W.O.T |
3.8 ~ 4.4 |
1.75 ~ 2.35 |
Accelerator Position Sensor (APS)
Accelerator Position Sensor (APS) is installed on the accelerator pedal
module and detects the rotation angle of the accelerator pedal. The APS is one
of the most important sensors in engine ...
Circuit Diagram
...
See also:
Smart Key
Smart Key Code Saving
1.
Connect the DLC cable of GDS to the data link connector (16 pins)
in driver side crash pad lower panel, turn the power on GDS.
...
Auto Light Sensor Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the photo & auto light sensor (A) from crash pad upper
side by using screw ( ...
Copyright В© www.ksmanual.com 2014-2024