Kia Sorento: Specification
HO2S [Bank 1/Sensor 1]
| Item |
Specification |
| Heater Resistance (Ω) |
2.5 ~ 4.0 [20°C(68°F)] |
HO2S [Bank 1/Sensor 2]
| A/F Ratio (λ) |
Output Voltage(V) |
| RICH |
Approx. 0.9 |
| LEAN |
Approx. 0.04 |
| Item |
Specification |
| Heater Resistance (Ω) |
3.3 ~ 4.1Ω[21°C(69.8°F)] |
Heated Oxygen Sensor (HO2S)
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed
both upstream and downstream of the Manifold Catalytic Converter. The sensor
output voltage varies in accordance ...
Circuit Diagram
...
See also:
SRS components and functions
The SRS consists of the following components:
1. Driver's front air bag module
2. Passenger's front air bag module
3. Side impact air bag modules
4. Curtain air bag modules
5. Retractor ...
Blind Spot Detection Switch Inspection
1.
Disconnect the BSD switch connector.
2.
Operate the BSD switch, then check for continuity between terminals
of BSD switch connec ...
Brake Booster Installation
1.
Installation is the reverse of removal.
•
...
Copyright © www.ksmanual.com 2014-2024