Kia Sorento: Special Service Tools
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Automatic Transaxle System / Special Service Tools
| Tools (Number and name) |
Illustration |
Use |
| 09200-3N000 Engine support fixture(Beam) |
|
Removal and installation of the transaxle. Except lower supporter, use beam only with new engine support fixture supporter(SST No.:09200-2S000) |
| 09200-2S000 Supporter |
|
Removal and installation of the transaxle. Use this beam (SST No. : 09200-38001/3N000) with the supporter (SST No. : 09200-2S000) |
| 09200-2W000 Adapter |
|
Removal and installation of the transaxle. Use this beam (SST No. : 09200-38001/3N000) with the adapter (SST No. : 09200-2W000) |
| 09453-3L240 Oil seal installer(2WD) |
|
Installation of transaxle case oil seal. (In case of 2WD vehicle use this tool to both sides when installing oil seal, and 4WD vehicle should use transaxle case side only.) [Using with bar (SST No.:09231-H1100)] |
| 09453-2W100 Oil seal installer(4WD) |
|
Installation of transaxle case oil seal. (In case of 4WD vehicle use this tool to transaxle housing side when installing oil seal.) [Using with bar (SST No.:09231-H1100)] |
| 09231-H1100 Bar |
|
Installation of transaxle case oil seal. [Using with oil seal installer (SST No.:09453-3L241, 09453-2W100)] |
| 09480-A3800 Inhibitor switch guide pin |
|
| ※ Engine support fixture special tool assembly drawing |
| 1. 09200-3N000(Main bar) 2. 09200-3N000(Sub bar) 3. 09200-3N000(Handle) 4. 09200-3N000(Stopper) 5. 09200-3N000(Stopper) 6. 09200-3N000(Knobe) 7. 09200-3N000(Adapter) 8. 09200-2S000(Supporter) 9. 09200-3N000(Hanger) |
10. 09200-3N000(Clip) 11. 09200-3N000(Nut) 12. 09200-3N000(Pin) 13. 09200-2S000(Stopper) 14. 09200-2S000(Spacer) 15. 09200-2S000(Adapter) 16. 09200-2S000(Nut) 17. 09200-2S000(Supporter) 18. 09200-2W000(Adapter) |
Lubricants
Item
Specified lubricant
Quantity
Transaxle fluid
ATF SP-Ⅳ or equivalent
7.8 L
(2.06 U.S gal.,8.24 U.S.qt., 6.86 Imp.qt.)
...
Fault Diagnosis
Features a fail-safe mechanism that provides "limp-home" 4th gear hold
to enable the vehicle to be driven to the owner's home or dealer shop.
Fail-Safe: The TCM provides 4th ge ...
See also:
Output Speed Sensor Removal
1.
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
2.
Disconnect the input & output speed senso ...
Head Lamps Installation
1.
Install the head lamp bulbs.
2.
Reassemble the head lamp bulb covers.
3.
Reassemble the head lamp assembly a ...
Driver Airbag (DAB) Module and Clock Spring Inspection
Driver Airbag (DAB)
If any improper parts are found during the following inspection, replace
the airbag module with a new one.
...
Copyright В© www.ksmanual.com 2014-2024