1. |
Remove the front door trim.
(Refer to Body - "Front door")
|
2. |
Remove the front speaker (A) after removing the mounting screws.
|
1. |
Remove the rear door trim.
(Refer to Body - "Rear door")
|
2. |
Remove the rear speaker (A) after removing the mounting screws.
|
1. |
Remove the center fascia panel (A).
|
2. |
Remove the crash pad center speaker grill (A).
|
3. |
Remove the crash pad center speaker (A) after loosening the mounting
screws (2EA).
|
1. |
Remove the front door delta cover (A).
(Refer to Body - "Front door")
|
2. |
Remove the tweeter speaker (A) after disconnecting the connector.
|
1. |
Remove the left luggage side trim.
(Refer to Body - "Interior trim")
|
2. |
Remove the woofer speaker connector (A).
|
3. |
Remove the woofer speaker (A) after removing 4 nuts.
|
1. |
Remove the luggage side trim.
(Refer to Body - "Interior trim")
|
2. |
Remove the rear pillar trim.
(Refer to Body - "Interior trim")
|
3. |
Remove the surround speaker (A) after removing 2 nuts.
|
Smart Key
Smart Key Code Saving
1.
Connect the DLC cable of GDS to the data link connector (16 pins)
in driver side crash pad lower panel, turn the power on GDS.
...
Circuit Diagram
...
Drive Plate Removal and Installation
1.
Remove the automatic transaxle .
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate ( ...