Kia Sorento: Spark Plug Removal - Ignition System - Engine Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Spark Plug Removal

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Electrical System / Ignition System / Spark Plug Removal

1.
Remove the ignition coil.
(Refer to Ignition System - "Ignition Coil")
2.
Using a spark plug wrench, remove the spark plug (A).
  
•
Be careful that no contaminates enter into spark plug holes.

Spark Plug Cleaning
The combustion temporarily becomes unstable, due to the aged fuel and the carbon deposits accumulated on the spark plug(s) after long-term storage. [1st Method] 1. ...

Spark Plug Installation
1. Install in the reverse order of removal. Tightening torque: 14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft) ...

See also:

Blind Spot Detection Unit Inspection
BSD Unit Alignment To sense the cars exactly in the next lane with the radar, the direction of the sensor and the direction of the vehicle have to align. This is BSD unit alignm ...

Brake Line Installation
1. Installation is the reverse of removal.    Use a new washer (A) whenever ...

Fuel Tank Air Filter Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. D ...

Copyright В© www.ksmanual.com 2014-2024