Kia Sorento: Side Impact Sensor (SIS) Removal

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Removal

Front Side Impact Sensor

•	Removal of the airbag must be performed according to the precautions/procedures described previously.

•	Before disconnecting the side impact sensor connector(s), disconnect the side airbag connector(s).

•	Do not turn the ignition switch ON and do not connect the battery cable while replacing the side impact sensor.

1.	Disconnect the battery negative cable, and wait for at least three minutes before beginning work.

2.	Remove the front door trim. (Refer to the Body group- Front door)

3.	Disconnect the front side impact sensor connector and remove the front side impact sensor mounting screws.

Rear Side Impact Sensor

1.	Disconnect the battery negative cable and wait for at least three minutes before beginning work.

2.	Remove the rear seat. (Refer to the Body group- Seat)

3.	Remove the luggage side trim. (Refer to the Body group - Interior trim)

4.	Disconnect the rear side impact sensor connector.

5.	Loosen the rear side impact sensor mounting bolt and remove the rear side impact sensor.

Side Impact Sensor (SIS) Components

...

Side Impact Sensor (SIS) Installation

Front Side Impact Sensor • Do not turn the ignition switch ON and do not connect ...

See also:

Description
The 6-speed automatic transaxle consists of an overdrive clutch (OD/C), a one-way clutch (OWC), a lower and reverse brake (LR/B), an underdrive brake (UD/B), a 26 brake (26/B), and a 35R clut ...

Starter Reassembly
1. Reassemble in the reverse order of disassembly. ...

System settings
Press the key Select [System] Select menu through TUNE knob Memory Information Displays currently used memory and total system memory. Select [Memory Information] OK The currently us ...

Categories

Copyright © www.ksmanual.com 2014-2024